CNC Lathe Solutions: 40% Faster Machining, ISO-Certified

EN EN
High-Rigidity CNC Lathe Solutions for Automotive and Aerospace Turning

High-Rigidity CNC Lathe Solutions for Automotive and Aerospace Turning

HX CNC lathes deliver roundness under 3 µm and Ra 0.4 finishes using Mechanite beds and precision spindles. An EV motor shaft producer boosted throughput 40% while holding 5 µm tolerances, reducing scrap from 1.8% to 0.2%. Our machines process titanium, Inconel, and hardened steels with high-pressure coolant. With bar feeders and gantry loaders, one hydraulic connector plant runs 72-hour lights-out shifts at 92% OEE, cutting per-part cost 22%. Full ISO and CE certifications ensure global acceptance.
Get A Quote

Case Study

Automotive Constant Velocity Joint Housing Production

A tier-1 supplier used our CNC lathe with dual-spindle and live tooling to machine CV joint housings from forged blanks. Cycle time dropped from 4.2 min to 2.9 min by completing turning, drilling, and threading in one setup. Runout on bearing seats stayed below 5 µm, and tool life extended 35% with through-tool coolant. Scrap rate fell from 2.5% to 0.3%. Annual savings exceeded $200,000, and capacity doubled without adding floor space. The machine’s thermal compensation ensured consistent accuracy over 500,000 units annually.

Inconel 625 Valve Stem Machining for Offshore Oil

An offshore equipment manufacturer needed Inconel 625 valve stems with 10 µm profile tolerance and Ra 0.5 seal finish. Our CNC lathe turned at 140 m/min with CBN inserts and 80-bar coolant, preventing work hardening and maintaining insert life. Variation across a 2,000-unit lot stayed within 6 µm, satisfying stringent oilfield specs. Throughput rose 40% and insert consumption halved, saving $80,000 annually. The process met API 6A certification without secondary grinding, reducing per-part cost by 30% and lead time by two weeks.

Medical Device Swiss-Type Machining on CNC Lathe

A surgical instrument producer needed small-diameter stainless steel bone pins with thread and cross-hole in one operation. Our CNC lathe with sub-spindle and live tooling turned, drilled, and threaded 3 mm diameter parts from bar stock. Cycle time of 18 seconds per part yielded 1,200 pieces per hour with ±0.005 mm tolerance. Surface finish of Ra 0.2 µm met ASTM F899. Scrap was below 0.1%. The unattended cell ran 48 hours, using a magazine bar feeder, and the customer reduced manufacturing cost by 45% compared to their previous CAM-operated screw machines. Full lot traceability was maintained.

CNC Lathe

Pneumatic Single-Spindle Double-Head CNC Lathe - One-Clamp Processing for Aerospace/Medical Precision Components VIEW DETAILS

Pneumatic Single-Spindle Double-Head CNC Lathe - One-Clamp Processing for Aerospace/Medical Precision Components

Hydraulic Single-Spindle Double-Head CNC Lathe | Efficient Machining for Hardware Components VIEW DETAILS

Hydraulic Single-Spindle Double-Head CNC Lathe | Efficient Machining for Hardware Components

Hengxing Dual-spindle CNC lathe- 2x Efficiency Dual-End Machining for Mining/Automotive Parts VIEW DETAILS

Hengxing Dual-spindle CNC lathe- 2x Efficiency Dual-End Machining for Mining/Automotive Parts

FANUC-Controlled Hydraulic Double-Spindle CNC Lathe - High-Precision Machining for Axle Manufacturing VIEW DETAILS

FANUC-Controlled Hydraulic Double-Spindle CNC Lathe - High-Precision Machining for Axle Manufacturing

HX CNC designs and manufactures high-rigidity slant bed CNC lathes for precision turning of shafts, discs, and complex components. Our lathes feature FEA-optimized 45° Mechanite beds, hand-scraped guideways, and 11–22 kW spindle motors delivering 190–350 Nm torque for heavy cuts in steel and superalloys. Spindle nose types A2-5 to A2-8 accommodate chucks up to 10 inches. The 12-station servo turret indexes in 0.2 seconds, with live tool options at 5,000 rpm for milling and drilling. Linear roller guides and core-cooled ballscrews maintain ±2 µm positioning accuracy, verified by laser interferometer. One global bearing manufacturer uses our CNC lathe to produce 800,000 inner rings annually, holding 5 µm ID tolerance and achieving Cpk 1.73. With bar feeder integration, the machines run 24/5 unattended, increasing OEE from 65% to 88%. We offer turnkey solutions including tooling, programming, and automation. All lathes are CE and ISO 9001 certified. Our service team provides remote diagnostics, on-site training, and preventive maintenance. Visit hxcncmt.com to explore the full series and request a quote. We ship globally with installation support, ensuring rapid production ramp-up.

Frequently Asked Questions

What is the maximum turning diameter of HX CNC lathes?

Our CNC lathes handle turning diameters up to 400 mm over the bed and 250 mm over the cross slide. With optional large-bore spindles, bar capacity reaches 80 mm. Extended bed lengths accommodate shafts up to 1,500 mm. We configure machines to match your workpiece envelope, ensuring rigid support and accuracy across the full range of automotive and aerospace components. Custom configurations are available.
We use core-cooled ballscrews and spindle chillers to stabilize temperature within ±0.5°C. A thermal compensation algorithm in the CNC continuously shifts offsets based on real-time sensor data, keeping diameter drift under 5 µm over 8-hour shifts. This eliminates warm-up scrap and ensures Cpk above 1.67, crucial for tight-tolerance hydraulic and medical parts.
Yes. Our CNC lathes integrate seamlessly with gantry loaders, articulated robots, and bar feeders. The open M-codes and I/O interface support automated doors, parts catchers, and conveyor systems. We provide turnkey automation packages validated at our factory. One automotive client runs a robot-tended cell producing 600,000 shafts yearly with just one operator per shift, achieving 94% machine utilization.
The 12-station BMT turret supports axial and radial live tools up to 6,000 rpm with 25 Nm torque. We offer ER collet chucks, shell mill arbors, and tapping holders. High-pressure coolant through the tool reaches 80 bar for deep-hole drilling. This enables keyway milling, cross-drilling, and polygon turning within the same setup, reducing part handling and cycle time significantly.
We provide comprehensive installation, operator training, and preventive maintenance programs. Our service engineers offer remote diagnostics and on-site repair. We stock critical spare parts globally for fast shipment. Annual maintenance contracts include laser calibration and ballbar testing. Our application team helps optimize toolpaths and reduce cycle times, often achieving a 15-20% productivity improvement within the first month of production.

Our Company

Four-Level Leaders Inspect Shandong Hengxing Heavy Industry to Boost High-Quality Manufacturing

20

Nov

Four-Level Leaders Inspect Shandong Hengxing Heavy Industry to Boost High-Quality Manufacturing

How Shandong Hengxing's innovative double-head CNC lathes are driving high-end manufacturing growth. Discover their 0.01mm precision, AI-driven R&D, and global market impact. Learn more.
View More
Hengxing's Middle-Drive Double-Head CNC Lathe 200% Efficiency Boost, Global Reach

25

Nov

Hengxing's Middle-Drive Double-Head CNC Lathe 200% Efficiency Boost, Global Reach

Discover how Hengxing's middle-drive double-head CNC lathe achieves 200% efficiency gains, solves concentricity issues, and powers precision shaft processing globally. Learn more.
View More
Intelligent Upgrade Leads Industry Transformation Dual-Spindle CNC Lathes Become Core Equipment for Precision Manufacturing

25

Nov

Intelligent Upgrade Leads Industry Transformation Dual-Spindle CNC Lathes Become Core Equipment for Precision Manufacturing

Discover how dual-spindle CNC lathes enable 0.001mm accuracy and 50%-80% higher efficiency in automotive, aerospace, and precision manufacturing. Drive intelligent production today.
View More

Customer Testimonials

Carlos Mendez
Carlos Mendez

We purchased two HX CNC lathes for our heavy equipment pin production. The machines hold 8 µm cylindricity all day, and we moved from three shifts to lights-out operation with a gantry loader. Scrap dropped to 0.15%, and output increased 55%. ROI was reached in 11 months. Their support team helped us program complex threading routines, and now we run 24/6 with minimal operator intervention. We are very satisfied with the machine reliability and quality.

Priya Singh
Priya Singh

As a medical device contract manufacturer, we needed a CNC lathe capable of producing titanium bone screws with sub-micron surface finish and complete traceability. HX’s lathe delivered Ra 0.2 µm surfaces and held tolerances within 4 µm over 30,000-piece batches. With the bar feeder, we reduced labor by 70% and passed FDA audits easily. The machine’s thermal stability is excellent, and we have since ordered a third lathe. Highly recommend.

Get a Free Quote

Our representative will contact you soon.
Email
Name
WhatsApp
Mobile
Company Name
Message
0/1000
hyundai cnc lathe
cnc lathe 2 axis
automatic cnc lathes
cnc lathe machining services
dual turret cnc lathe
Box Way Construction for Maximum Rigidity

Box Way Construction for Maximum Rigidity

Our CNC lathes utilize wide-spaced, hand-scraped box ways on the bed and saddle, providing superior vibration damping for heavy interrupted cuts. The 45° slant bed, cast from fine-grain Mechanite, improves chip evacuation and thermal stability. Static stiffness exceeds 45 N/µm, enabling 3 mm depth cuts in hardened steel while holding roundness under 2.5 µm. A gear blank manufacturer using our box-way lathe reported 50% longer tool life and 0.4 µm Ra finish without grinding, reducing per-part cost by 20% and increasing production capacity by 35% in the first year. This robust construction delivers decades of precision.
Quick-Change Tooling and High-Torque Spindle

Quick-Change Tooling and High-Torque Spindle

The HX CNC lathe features a cartridge-style spindle delivering 15 kW continuous power and 200 Nm torque at low RPM, enabling deep cuts in superalloys. The VDI or BMT turret allows tool changes within 30 seconds, reducing setup time for high-mix production. Live tool stations with 5,000 rpm and 25 Nm capability eliminate secondary operations. A hydraulic fitting manufacturer switched to our lathe and consolidated three processes, cutting total machining time by 40% and achieving a 25% cost reduction. Spindle chiller and oil-mist lubrication extend bearing life beyond 20,000 hours for 24/7 reliability.
Smart Control and Energy-Efficient Automation

Smart Control and Energy-Efficient Automation

Our CNC lathes come with a user-friendly CNC control featuring adaptive feed rate, tool load monitoring, and energy dashboards. MTConnect and OPC-UA connectivity enable real-time production tracking and predictive maintenance. The automatic power-off function reduces idle energy consumption by 20%. A Tier-1 automotive supplier integrated our lathes into their smart factory, achieving 90% OEE and reducing per-part energy cost by 15%. Remote notifications alert operators to tool wear, preventing scrap. Combined with a bar feeder, the system runs over a weekend with zero attendance, maximizing spindle utilization.
CNC Lathe Solutions: 40% Faster Machining, ISO-Certified
CNC Lathe Solutions: 40% Faster Machining, ISO-Certified
CNC Lathe Solutions: 40% Faster Machining, ISO-Certified

Get a Free Quote

Our representative will contact you soon.
Email
Name
WhatsApp
Mobile
Company Name
Message
0/1000